Category Archives: Atlanta Residential Architecture

Handmade Barn Door makes Architects’ Condo Remodel

HANDMADE BARN DOOR MAKES ARCHITECTS’ CONDO REMODEL Without a doubt the 6′-0″ wide by 8′-0″ high barn door, made with wood salvaged from deconstructed homes in central Florida, is the first thing visitors notice in our 8th level condo in Midtown Atlanta. It was installed as part of the major remodeling we did last year. The barn door, along with […]

Read More

Attention to High Performance Details In New Homes Pays Off

On the One Hand… …the Proud Green Home at Serenbe has been a kind of Experimental House for High Performance Design and Construction. Some of the features, products and practices we’re trying for the first time with this home, others we’ve used or done before, but they are still relatively new to the industry. To […]

Read More

Hold the Foam! This Home is Already High Performance!

Before spray foam insulation was installed in the walls and roof-line of this Atlanta-area home, it tested better than the 2012 IECC requirements in climate zones 3-8 for building envelope tightness. The High Performance Home Several weeks ago we reported that the Proud Green Home at Serenbe, built by the Imery Group, achieved a blower door […]

Read More

Deconstruction and Re-construction, DIY Renovation Part 2

I have one word. DUST. My inner neat freak (ok, maybe not so inner) has been put to the test during the renovation of our Atlanta condo. Everything involved some sort of dust. When I was constructing the barn door, which turned out beautifully, I could walk away from my Dad’s wood shop where we […]

Read More

PGH at Serenbe is 90% Tighter than Energy Code – Before Drywall!!

Before drywall was installed, I tested the infiltration (air leakage) at the Proud Green Home (PGH) at Serenbe, and the home achieved 0.72 ach50, or 0.055 ELR (more on these numbers in a minute). In other words, it’s really tight!!! The 2009 International Residential Energy Code (IECC), which is adopted in most states, requires an infiltration rate of […]

Read More

Serenbe Modern Proud Green Home Update: Heating, Ventilation and Air Conditioning Systems

Things are really moving along on the Proud Green Home at Serenbe. This past Friday, the mechanical inspector paid a visit and we passed! Ahead this week; the builder has ordered the final plumbing inspection, the sprayfoam contractor is installing the open-cell foam in all the walls and roof, we will be performing the pre-drywall inspection for […]

Read More

Designing A Perfect Residential Wall – Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by ASHRAE for the Metro Atlanta area to use when designing heating systems, is […]

Read More

14 Design Don’ts for High Performance Homes, Part One

There are a lot of ways to design a home. Designing one for high performance, though, or even better-than-average performance, has many recommended best practices that are based on a lot of research of homes that have failed because they’re unhealthy, inefficient, and/or falling apart. This is why we have building scientists (see SOAP BOX […]

Read More

I’m an HVAC Magician, I Make Mini-Splits Disappear

Making Mini-Splits Disappear A lot of homeowners and folks in the building industry in the United States don’t want to see their HVAC (a.k.a. heating and air) systems exposed, even if it means high performance, healthy living environment, and total control. There is a magical (OK, maybe that’s a bit of a stretch) way to have cake and […]

Read More

Design and Build Smart: Use Advanced Framing to Save Time, Money and Energy

Employing Advanced Framing Techniques during the design and construction phases saves on labor, material and the amount of heat loss in a new home. 25% of a the building shell area in a typical home is made of wood. The other 75% is primarily windows, doors, insulation, finishes and cladding. When you factor in the […]

Read More