Tag Archives: build tight

Building Science is Worthless…

Building Science is Worthless… Thousands of hours went in this construction detail. When we factor all the time spent by building science engineers, from all over the world, researching and testing each material and the various assembly options, and to figure out what works and what fails, the time is, really, impossible to quantify. Not to mention […]

Read More

Preserving a Historic Home with Building Science

PRESERVING A HISTORIC HOME with BUILDING SCIENCE Historic Preservation is mostly about preserving and protecting buildings, objects, landscapes or other artifacts of historical significance. The Historic Molette House, ca. 1825 has a lot of significance in the Molette Family, as well with the people near the Molette’s Bend area near Selma, Alabama. When the home was moved […]

Read More

Attention to High Performance Details In New Homes Pays Off

On the One Hand… …the Proud Green Home at Serenbe has been a kind of Experimental House for High Performance Design and Construction. Some of the features, products and practices we’re trying for the first time with this home, others we’ve used or done before, but they are still relatively new to the industry. To […]

Read More

Hold the Foam! This Home is Already High Performance!

Before spray foam insulation was installed in the walls and roof-line of this Atlanta-area home, it tested better than the 2012 IECC requirements in climate zones 3-8 for building envelope tightness. The High Performance Home Several weeks ago we reported that the Proud Green Home at Serenbe, built by the Imery Group, achieved a blower door […]

Read More

PGH at Serenbe is 90% Tighter than Energy Code – Before Drywall!!

Before drywall was installed, I tested the infiltration (air leakage) at the Proud Green Home (PGH) at Serenbe, and the home achieved 0.72 ach50, or 0.055 ELR (more on these numbers in a minute). In other words, it’s really tight!!! The 2009 International Residential Energy Code (IECC), which is adopted in most states, requires an infiltration rate of […]

Read More

Serenbe Modern Proud Green Home Update: Heating, Ventilation and Air Conditioning Systems

Things are really moving along on the Proud Green Home at Serenbe. This past Friday, the mechanical inspector paid a visit and we passed! Ahead this week; the builder has ordered the final plumbing inspection, the sprayfoam contractor is installing the open-cell foam in all the walls and roof, we will be performing the pre-drywall inspection for […]

Read More

Designing A Perfect Residential Wall – Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by ASHRAE for the Metro Atlanta area to use when designing heating systems, is […]

Read More

14 Design Don’ts for High Performance Homes, Part One

There are a lot of ways to design a home. Designing one for high performance, though, or even better-than-average performance, has many recommended best practices that are based on a lot of research of homes that have failed because they’re unhealthy, inefficient, and/or falling apart. This is why we have building scientists (see SOAP BOX […]

Read More

Improved Energy Codes, Diminishing Return, & a New Performance Baseline

It wasn’t long ago that the EPA’s ENERGY STAR New Homes Program created an uproar in the residential building community by releasing Version 3.0 of it’s volunteer 3rd party verification program. One of the biggest crack downs in the new version was it’s requirement for HVAC Contractors to test and verify their installations of the heating […]

Read More

ENERGY STAR Certified Home in Grant Park – Atlanta, GA

Recently, this house in the historic district of Grant Park, Atlanta, was certified through the ENERGY STAR New Homes program at the EPA. The final inspection revealed an air tightness of 0.77 ach50, which is near the maximum acceptable air infiltration level of the aggressive Passive House program (0.6 ach50). The final HERS Index was around 64, which means (among other […]

Read More