Tag Archives: construction details

Handmade Barn Door makes Architects’ Condo Remodel

HANDMADE BARN DOOR MAKES ARCHITECTS’ CONDO REMODEL Without a doubt the 6′-0″ wide by 8′-0″ high barn door, made with wood salvaged from deconstructed homes in central Florida, is the first thing visitors notice in our 8th level condo in Midtown Atlanta. It was installed as part of the major remodeling we did last year. The barn door, along with […]

Read More

Preserving a Historic Home with Building Science

PRESERVING A HISTORIC HOME with BUILDING SCIENCE Historic Preservation is mostly about preserving and protecting buildings, objects, landscapes or other artifacts of historical significance. The Historic Molette House, ca. 1825 has a lot of significance in the Molette Family, as well with the people near the Molette’s Bend area near Selma, Alabama. When the home was moved […]

Read More

Attention to High Performance Details In New Homes Pays Off

On the One Hand… …the Proud Green Home at Serenbe has been a kind of Experimental House for High Performance Design and Construction. Some of the features, products and practices we’re trying for the first time with this home, others we’ve used or done before, but they are still relatively new to the industry. To […]

Read More

PGH at Serenbe is 90% Tighter than Energy Code – Before Drywall!!

Before drywall was installed, I tested the infiltration (air leakage) at the Proud Green Home (PGH) at Serenbe, and the home achieved 0.72 ach50, or 0.055 ELR (more on these numbers in a minute). In other words, it’s really tight!!! The 2009 International Residential Energy Code (IECC), which is adopted in most states, requires an infiltration rate of […]

Read More

Heat Flow, Electric Furnaces, and Lessons in Energy Efficient Design

When Jodi and and I moved from Tampa to Atlanta in 2008, we decided to try high rise living. We were living in a 1916 bungalow, which we loved dearly, and looked forward to something fresh and new. Something that would not leak like a sieve, and as a result be more comfortable and use less energy. The sales […]

Read More

Designing A Perfect Residential Wall – Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by ASHRAE for the Metro Atlanta area to use when designing heating systems, is […]

Read More

14 Design Don’ts for High Performance Homes, Part One

There are a lot of ways to design a home. Designing one for high performance, though, or even better-than-average performance, has many recommended best practices that are based on a lot of research of homes that have failed because they’re unhealthy, inefficient, and/or falling apart. This is why we have building scientists (see SOAP BOX […]

Read More

Design and Build Smart: Use Advanced Framing to Save Time, Money and Energy

Employing Advanced Framing Techniques during the design and construction phases saves on labor, material and the amount of heat loss in a new home. 25% of a the building shell area in a typical home is made of wood. The other 75% is primarily windows, doors, insulation, finishes and cladding. When you factor in the […]

Read More

Proud Green Home at Serenbe Construction Update: Installing the Footings

WEEK 2: Construction is underway at the Proud Green Home at Serenbe, and the concrete footings have been poured! Next up…concrete stem walls, which happens tomorrow! After that, we’re pouring the slab-on-grade. Though we considered many good strategies to control heat, moisture and air, here is the foundation detail we are using. Here are some photos […]

Read More

ENERGY STAR Certified Home in Grant Park – Atlanta, GA

Recently, this house in the historic district of Grant Park, Atlanta, was certified through the ENERGY STAR New Homes program at the EPA. The final inspection revealed an air tightness of 0.77 ach50, which is near the maximum acceptable air infiltration level of the aggressive Passive House program (0.6 ach50). The final HERS Index was around 64, which means (among other […]

Read More